Home Heating Repair Kenmore

Fast Same-Day Service – Warm Your Home Today

Call Now: (888) 495-2151

Our Services

We provide professional home heating repair services across the United States. Our experienced HVAC technicians fix no heat, cold air, strange noises, cycling issues, and more with same-day service and upfront pricing.

No Heat / System Won't Turn On

No heat means a problem that needs fast diagnostics. We’ll check the thermostat, breaker and furnace safety switches. Our tech will test the ignitor and heat exchanger for faults. If parts are needed we use quality replacements and give a flat-rate quote up front. Call us and we’ll be at your door same day to get your home warm again.

Blowing Cold Air

Cold air blowing means the blower or refrigerant circuit is off. We’ll verify the fan motor, capacitors and system pressures. Our crew runs a full safety check and cleans the coils before any repair. You’ll get a clear price before any work starts. We’ll fix it fast so you stop shivering.

Strange Noises from Furnace

Strange noises usually point to a loose blower wheel or a failing motor. Our tech will open the furnace, tighten bolts and measure motor bearings. We replace worn parts with OEM quality and test for proper operation. All work is done under a same-day guarantee. Your furnace will run quietly and safely.

Frequent Cycling / Short Cycling

Frequent cycling is a sign of airflow or limit switch issues. We inspect filters, ducts and the pressure switch. The technician will clean the flame sensor and adjust the thermostat if needed. You’ll get an honest flat-rate price and a safety verification. The system will stay on longer and run efficiently.

Pilot Light & Ignition Problems

Pilot light or ignition problems can leave you in the cold. We’ll check the gas valve, spark electrode and flame sensor. If the ignitor is bad we replace it with a certified part. A transparent quote is given before any work, and we do a safety shut-off test after repair. You’ll have reliable heat without surprise costs.

Heat Pump & Boiler Repair

Heat pump or boiler issues need quick service. Our crew tests refrigerant levels, compressor health and boiler pressure. We use quality parts and perform a full system safety check. Call (888) 495-2151 for same-day service and a flat-rate estimate. Your home will be warm and safe again.

Service Area

{"response":"We serve Kenmore and the surrounding neighborhoods, from Bothell West and Bothell East to the Brier, Inglewood-Finn Hill and nearby Bothell proper. Our crews know the older homes on the historic Kenmore floodplain and the newer subdivisions spreading out toward Bothell’s newer developments. Cold winters hit these areas hard, so we prioritize same-day or next-day emergency heating repairs to get families warm fast. Our technicians perform in-home diagnostics, repairs and tune-ups on furnaces, boilers and heat pumps, using quality parts and flat-rate pricing. We focus on safety checks and energy-efficient fixes so every house stays comfortable and safe through the chill."}

Why Choose Us

After seeing how hard it can be to find dependable home heating repair, the owner — a retired US Navy veteran — built this website and network to connect homeowners like you with local professionals who show up fast with expert know how to get your heater working quickly.

Same-Day Appointments

We can be at your door the same day you call. Our crews work quick to diagnose the problem. We bring the right tools and parts to fix it right then. No waiting for a later appointment. You get heat back fast, no excuses.

Flat-Rate Pricing

Our pricing is flat, no hidden fees. You know the cost before we start. We charge a set rate for each service, like furnace repair or boiler tune-up. That way you can budget and avoid surprise bills. Honest pricing keeps families comfortable without stress.

90-Day Warranty

All work comes with a 90-day warranty on labor and parts. If something goes wrong, we’ll come back and fix it at no extra cost. The warranty shows we stand behind our work. It protects your home and wallet. You can trust the repair will last.

Licensed HVAC Technicians

Our technicians are fully licensed and trained. They know how to work safely on furnaces, boilers, heat pumps, and more. They follow strict safety checks every visit. You’ll have peace of mind knowing a pro is handling your system. They stay up-to-date on the latest codes.

Fully Stocked Trucks

Our trucks are stocked with common parts and tools. We don’t need to run to the store for a valve or thermostat. That cuts downtime and gets your heat back sooner. You’ll see fewer callbacks and faster service. This readiness is what keeps families warm.

Nationwide Coverage

We serve Kenmore and the surrounding region, plus emergency calls statewide. If you’re stuck in a cold spot, we’ll dispatch the nearest crew. Our network lets us handle jobs quickly across the area. Call (888) 495-2151 for same-day help. You’ll get fast, reliable service wherever you are.

Schedule Your Home Heating Repair

One call is all it takes!

Call Now: (888) 495-2151

Frequently Asked Questions

We can be at your door the same day or next day, usually within a few hours of your call. Our crews are local and ready to diagnose and fix the problem fast. We bring the right parts and tools to get your heat back on. Safety checks are done before we finish the job. Call (888) 495-2151 and we’ll schedule you right away. You’ll know the flat rate up front, no hidden fees. We aim to keep your family warm and safe quickly.

Yes, we handle gas furnaces, electric units, and heat pumps. Our techs are certified for each system type. We diagnose the issue properly before fixing anything. We use quality parts that match manufacturer specs. Safety is a top priority on every job. We’ll explain what’s wrong in plain terms. You get a clear, honest repair plan.

Repair costs depend on the problem and parts needed. We give a flat-rate quote after a quick diagnostic. Typical furnace fixes run between $200 and $600, heat pump work can be a bit higher. No surprise charges after we start. We use quality parts so the fix lasts. If extra work is needed, we’ll get your okay first. You’ll know exactly what you’re paying before any work begins.

We do charge a service call fee, usually $79. That fee covers the travel, safety checks, and a basic diagnosis. If you decide to go ahead with the repair, we’ll apply the fee toward the total cost. It’s a flat amount, no hidden upsells. The fee is the same whether you’re in Kenmore or nearby. It ensures we can get a qualified tech out fast. You’ll hear the price up front.

We often can be on site the same day you call, especially for emergencies. If we’re booked, we’ll schedule you for the next day, early morning if possible. Our goal is to get heat back on before nightfall. We prioritize urgent calls in Kenmore. You’ll get a confirmation time when we book you. No waiting around for a vague callback. We’re there when you need us.

Yes, we guarantee our work with a 1-year labor warranty. Parts are covered by the manufacturer warranty. If a problem returns, we’ll come back at no extra labor cost. We stand behind our repairs and safety checks. Our guarantee is written in plain English, no fine print. You can trust we’ll fix it right the first time. Your peace of mind is part of the service.

If we can't fix the heating system, we won't leave you hanging. We'll explain why it's beyond repair and give you a clear, flat-rate quote for a replacement. We only recommend brands we trust and that meet safety codes. Our technicians will walk you through financing options if needed. You’ll get a written estimate before any work starts, no hidden fees.

We service both old rigs and the latest high-efficiency models. Our crew knows the quirks of legacy furnaces and newer condensing boilers. We use OEM parts to keep warranties intact. If a part is no longer made, we suggest a compatible upgrade that saves you money. Call us and we’ll schedule a diagnostic to see what your system needs.

Yes, we can do a full tune-up on any heating system. We clean the burners, check the heat exchanger for cracks, and test the safety controls. The blower motor and fan belts get inspected and lubricated. We also verify proper gas pressure and airflow to boost efficiency. After the service you’ll get a report showing what was done and any recommendations.

A typical repair takes a few hours once we arrive, usually under four hours. Simple fixes like a bad thermostat or a faulty sensor are done quickly. More complex jobs, like a heat pump compressor swap, may need a full day but we’ll keep you posted. We always aim to finish same-day so you’re not left in the cold. If we need extra time, we’ll give you a clear timeline and cost estimate.

We cover Kenmore and the surrounding Seattle suburbs, plus most of King County. If you’re within a 30-mile radius of our depot, we can get to you fast. For addresses outside that zone, give us a call and we’ll let you know if we can dispatch a tech. Our dispatch system prioritizes emergency calls so you get help when you need it. You can reach us at (888) 495-2151 for confirmation.

Before we arrive, clear a path to the furnace or boiler so we can work safely. Turn off any pets and lock doors you don’t want us to touch. Gather any warranty info or previous service records you have. If you have a thermostat, note any error codes it shows. This helps us diagnose faster and get your home warm again quickly.

Still Have Questions?

Give Us a Call, we can answer your questions!

Call Now: (888) 495-2151